Digital Back-lit Key Support 12V 24V Metal Keypad Access Control

281.00 AED295.00 AED (-5%)

9969 in stock

International Shipping
Estimated Delivery to:
1.     UAE:        10 – 15 days
2.     USA:        8 – 12 days
3.     Europe:    7 – 10 days

Report Abuse

Perfect Digital Backlit Key Support 12V 24V Metal Keypad Access Control Manufacturer Fast Operating Speed SingleDoor RFID Access

I.Main Features

The unit is single door multi-function standalone access controller or a Wiegand output keypad or card reader.

It is suitable for mounting either indoor or outdoor in harsh environments.

It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is available in either a bright silver or Matt silver finish.

The electronics are fully potted so the unit is waterproof and conforms to IP68.

This unit supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option.

The inbuilt card reader supports 125KHZ EM cards,IF you need 13.56MHz Mifare cards.Please contact us!

The unit has many extra features including lock output current short circuit protection, Wiegand output , and a back-lit keypad.

These features make the unit an ideal choice for door access not only for small shops and domestic households

But also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.

II.Features

  • Waterproof, conforms to IP68
  • Strong Zinc Alloy Electroplated anti-vandal case
  • Full programming from the keypad
  • 2000 uses, supports Card, PIN, Card + PIN
  • Can be used as a stand alone keypad
  • Backlight keys,crystal glass Keypad,Perfect digital Backlit Key
  • Wiegand 26 input for connection to external reader
  • Wiegand 26 output for connection to a controller
  • Adjustable Door Output time, Alarm time, Door Open time
  • Very low power consumption (30mA)
  • Fast operating speed, <20ms with 2000 users
  • Lock output current short circuit protection
  • Easy to install and program
  • Built in light dependent resistor (LDR) for anti tamper
  • Built in buzzer
  • Red, Yellow and Green LEDS display the working status

III.Specification

Operating Voltage

DC12V&DC24V

User Capacity

2000Users

Card Reading Distance

3-6 cm

Active Current

<60mA

Idle Current

25±5 mA

Lock Output Load

Max 3A

Alarm Output Load

Max 20A

Operating Temperature

-45 to 60degree

Operating Humidity

10%- 90% RH

Waterproof

Conforms to IP68

Adjustable Door Relay time

0 -99 seconds

Adjustable Alarm Time

0- 3 minutes

Wiegand Interface

Wiegand 26

Wiring Connections

Electric Lock, Exit Button, External Alarm,External reader

IV.Wiring

Colour Function Description

Pink

BELL_A

Doorbell button one end

Pale blue

BELL_B

Doorbell button to the other end

Green

D0

WG output D0

White

D1

WG output D1

Grey

ALARM

Alarm negative(alarm positive connected 12 V+)

Yellow

OPEN

Exit button one end(the other end connected GND)

Brown

D_IN

Magnetic switch one end(the other end connected GND)

Red

12V+

12V + DC Regulated Power Input

Black

GND

12V – DC Regulated Power Input

Blue

NO

Relay normally-on end(Connect positive electric lock “-“)

Purple

COM

Relay Public end, connect GND

Orange

NC

Relay Closed end(connect negative electric lock “-“)

V. Anti Tamper Alarm

The unit uses a LDR (light dependent resistor) as an anti tamper alarm. If the keypad is removed from the cover then the tamper alarm will operate.

VI.Sound and Light Indication

Operation Status

Red Light

Green Light

Yellow Light

Buzzer

Power on

Bright

Di

Stand by

Bright

Press keypad

Di

Operation successful

Bright

Di

Operation failed

DiDiDi

Enter into programming mode

Bright

In the programming mode

Bright

Di

Exit from the programming mode

Bright

Di

Open the door

Bright

Di

Alarm

Bright

Alarm

VII.To Reset to Factory Default

a. Disconnect power from the unit

b. Press and hold # key whilst powering the unit back up

c. On hearing two “Di” release # key, system is now back factory settings

Please note only installer data is restored, user data will not be affected

1pcs 1P68 Weatherproof Access Controller

1pcs English User Manul

2pcs Screw

Other accessories

Additional information

Model Number

N1

Brand Name

Realhelp

Operating Voltage

DC12V&DC24V

User Capacity

2000Users

Card Reading Distance

3-6 cm

Active Current

<60mA

Lock Output Load

Max 3A

Alarm Output Load

Max 20A

Operating Temperature

-45 to 60degree

Waterproof

Conforms to IP68

Adjustable Door Relay time

0 -99 seconds

Wiegand Interface

Wiegand 26

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Vendor Information

  • Store Name: QN’s Home Store
  • Vendor: QN Store
  • No ratings found yet!

Product Enquiry

Please Login to make enquiry about this product

Main Menu